Overview
Maintenance Reminders answers one question every morning: which units need attention, and who do I call. Build your maintenance schedules once in Settings, put your customers' units on them, and ShopView works out when each service comes due from the calendar, mileage and engine hours. You see it on the asset, on a new Maintenance reminders list under Customers, and on the work order while the unit is in the bay, and you can email the customer a reminder in a couple of clicks.
It's on for everyone at release, and it starts working as soon as you build your first schedule. Nothing shows until your shop builds one.
Build your schedules once
Maintenance schedules live in Settings, under Maintenance. Every location sees every schedule. Building schedules needs Settings Service, which admins and office users have by default.
A schedule is a list of services, for example PM-A, PM-B and an annual inspection. Every service has a calendar interval (every so many days or months, or At a day of the year for seasonal work like winterizing), and you can add mileage or engine hours as extra triggers. The service comes due at whichever arrives first.
Compliance inspections are their own kind of service: answer Is this a compliance inspection?, then set the Type, the Term and Remind before expiry. They're tracked against the certificate on the asset, and show in orange, never red.
Attach canned lines, so adding the service to a work order brings its work with it. The lines show their hours, never a price.
Services also covered lets a bigger service include smaller ones: PM-C covering PM-A and PM-B resets all three when it's done.
Reminder timing on each service sets when it starts to read due soon. It starts at 14 days before the due date.
Edit, Duplicate, Archive and Restore from the schedule's menu. Nothing is ever deleted, and the list has Active and Archived tabs.
Every unit's Maintenance tab
Enroll in Schedule puts a unit on a schedule from its new Maintenance tab, or up to 2,500 of a customer's units at once from the customer's Assets tab.
Last service dates fill in from the unit's history, so a unit doesn't start out overdue for work you already did. You can change them before you enroll.
The Maintenance tab shows the unit's mileage and engine hours, what was last recorded and where, and every service it owes in one list sorted by date.
Dates worked out from mileage or engine hours are estimates from the unit's own past readings: they show a month with High, Medium or Low confidence beneath it. Calendar and certificate dates show the exact day. A unit with too few readings shows its calendar date with Needs mileage reading.
Enter Mileage records a new mileage or engine hours reading and updates every service on the unit right away.
Record certificates in the new Compliance section on the asset card: Type, Certificate number, Start date, End date and a file. A renewal adds a new record, and older ones stay under Certificate history.
One list of everything due
Customers has a new Maintenance reminders tab: every unit that's overdue, due today or due in the next 3 months, across your whole organization.
Four tiles filter the list: Overdue, Due in a month, Due in 3 months and Needs readings. Pick more than one to combine them. The Compliance inspection and Paused chips narrow further, and shops with more than one location get a location filter.
Each row shows the unit, the customer, the service, its Due status, the due date and the work order it's on, with that work order's status.
Create work order raises an estimate with the service's canned lines already on it. When the work is complete, Invoice takes you straight to invoicing.
Contact shows the customer's phone numbers and email, ready to call or send a reminder.
Your tiles, filters, search and sort are still there when you come back.
Pause it or mark it done
Pause a service until a date, up to 12 months ahead, with a reason: Truck parked or off the road, Done at another shop, Customer asked to wait, or Other. Pause one service, or all services on the unit. A paused service leaves the list and comes back on its date, or sooner when the work is done. Resume now ends it early.
Mark complete resets a service now, from the date you choose. Use it for work on a work order that won't be invoiced yet, or pick Completed elsewhere for work done at another shop. Undo complete puts the service back the way it was.
Right on the work order
A new Maintenance schedule card on the work order, under the asset card, shows what else the unit is due for while it's in the bay, with a count like 1 due.
Add Service puts the service's canned lines on this work order or a new one. They arrive as ordinary lines, so the work order works exactly as it does today. At another location, Add Service adds the same work at that location's rates, without parts, and each line's internal note lists the parts the original location uses.
The service resets when the work order is invoiced. A new step after invoicing, When was the maintenance done?, proposes the day the service's lines were closed. Change it, or press Confirm dates. Compliance certificates are entered in the same step.
Mileage and Engine Hours entered on the work order count as a reading straight away.
The Work Orders list has a new Maintenance schedule column and a From maintenance filter, which shows how many work orders came from maintenance and their total.
Remind the customer by email
Send reminder on the contact card emails the customer about one unit, or about all of their units with maintenance coming up. The email lists each unit's services as Past due, Due today or Coming up, with no dates, and asks the customer to give you a call.
Pick who receives it from the customer's contacts, or type another address. Add email adds an address to a contact that has none. It comes from your organization's name, and replies go to the person who sent it.
The contact card shows when a reminder was last sent for the unit, so nobody sends twice. Maintenance notifications on the customer card turns reminders off for one customer; it's on for every customer to start.
Nothing is emailed automatically. A customer gets a reminder only when someone presses Send reminder, and enrolling a unit sends nothing. Automatic reminder emails come in a later release.
Permissions
There's no new permission. Building schedules needs Settings Service. Viewing the Maintenance reminders list and the Maintenance tab needs access to Customers. Enrolling, entering a reading, pausing, Mark complete, certificates and Send reminder need create and edit customers (technicians can't send reminders by default). Add Service and Create work order need create and edit work orders, and Invoice on the list needs create and edit invoicing. Technicians see the work order card read-only.
Good to know
Estimates work from day one: the mileage and engine hours on past work orders and in imported history are loaded as readings at release. The mileage typed on the asset itself isn't, because ShopView has no date for it.
Changing a schedule doesn't change units already on it. Remove the unit from the schedule and enroll it again to give it the new version. Archiving a schedule takes every unit off it, and restoring puts none back.
Each schedule keeps its canned lines at the location it was built at; only someone with access to that location can change them.
The reminders list and the work order card show line counts and hours, never prices. Mileage covers miles and kilometres alike; the numbers are whatever your shop enters. Every screen works on a phone.
Not in this release: automatic reminder emails, a reading history screen, a maintenance change log screen, reordering services inside a schedule, and a list of the units on a schedule.
FAQ
My customer didn't get a maintenance reminder.
Nothing is emailed automatically in this release. Open Customers, then the Maintenance reminders tab, press Contact on the unit's row, then Send reminder.
Send reminder is greyed out.
The customer's Maintenance notifications setting is off. Turn it back on with the toggle on the customer card.
I don't see Send reminder at all.
Sending needs create and edit customers, and at least one of the customer's contacts needs an email address.
The truck was serviced and it still shows overdue.
A service added to a work order resets when that work order is invoiced. If it won't be invoiced yet, Mark complete in the row's menu resets it now.
Why does it show a month instead of a date?
That date is estimated from the unit's mileage or engine hours, so it shows a month with its confidence beneath it. Calendar and certificate dates show the exact day.
It says Needs mileage reading.
The unit has too few usable readings to estimate from, so its calendar date counts for now. Enter the mileage on its next work order, or with Enter Mileage on the Maintenance tab.
I changed a schedule and my units didn't change.
Units keep the schedule as it was when they were enrolled. Remove the unit from the schedule and enroll it again to give it the new version.
I restored an archived schedule and my units aren't on it.
Archiving takes every unit off the schedule, and restoring doesn't put them back. Enroll them again; their history is kept.
The lines added at our other location have no parts.
The schedule's canned lines belong to the location it was built at. At other locations Add Service adds the same work at that location's rates, and each line's internal note lists the parts to add.
A truck is parked for the winter. How do I stop the reminders?
Pause it with All services on the unit, until a date up to 12 months ahead, and pick Truck parked or off the road.
